gavrasm Gerd's AVR assembler version 5.4 (C)2022 by DG4FAC
----------------------------------------------------------

Path:        /home/sergeyyarkov/Documents/Projects/Firmwares/AVR/attiny2313a_thermostat/
Source file: firmware.asm
Hex file:    firmware.hex
Eeprom file: firmware.eep
Compiled:    23.04.2023, 20:09:24
Pass:        2

     1: ;
     2: ; Project name: thermostat
     3: ; Description: Electronic thermostat on AVR Microcontroller
     4: ; Source code: https://github.com/sergeyyarkov/attiny2313a_thermostat
     5: ; Device: ATtiny2313A
     6: ; Device Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf
     7: ; Package: SOIC-20W_7.5x12.8mm_P1.27mm
     8: ; Assembler: AVR macro assembler 2.2.7
     9: ; Clock frequency: 8 MHz External Crystal Oscillator
    10: ; Fuses: lfuse: 0xCF, hfuse: 0x9F, efuse: 0xFF, lock: 0xFF
    11: ;
    12: ; Written by Sergey Yarkov 22.01.2023
    13: 
    14: .INCLUDE "tn2313Adef.inc"
 -> Warning 009: Include defs not necessary, using internal values!
   File: /home/sergeyyarkov/Documents/Projects/Firmwares/AVR/attiny2313a_thermostat/firmware.asm, Line: 14
   Source line: .INCLUDE "tn2313Adef.inc"
    15: .LIST
    16: 
    17: .DEF TEMP_REG_A               = r16
    18: .DEF TEMP_REG_B               = r17
    19: .DEF DISP_NUM_L               = r22
    20: .DEF DISP_NUM_H               = r23
    21: 
    22: .EQU DIGIT_1_PIN              = PD2
    23: .EQU DIGIT_2_PIN              = PD3
    24: .EQU DIGIT_3_PIN              = PD4
    25: .EQU DIGIT_4_PIN              = PD5
    26: 
    27: .EQU LED_POWER_PIN            = PD6         ; Светодиод, который говорит о том что питание подано
    28: 
    29: .EQU USI_LATCH_PIN            = PB0         ; ST_CP на 74HC595
    30: .EQU USI_DO_PIN               = PB6         ; DS на 74HC595
    31: .EQU USI_CLK_PIN              = PB7         ; SH_CP на 74HC595
    32: 
    33: .EQU MCU_STATE_DEFAULT        = 0x01        ; Режим измерения температуры и сравнения с заданными параметрами
    34: .EQU MCU_STATE_PROGRAM        = 0x02        ; Режим настройки параметров в EEPROM
    35: .EQU MCU_STATE_ERROR          = 0x03        ; Режим ошибки, например когда не подключен датчик
    36: 
    37: ; **** МАКРОСЫ **************************************************
    38: .MACRO outi
    39:   ldi       @0, @2
    40:   out       @1, @0
    41: .ENDMACRO
    42: 
    43: .MACRO display_load
    44:   ldi   DISP_NUM_L,    LOW(@0)
    45:   ldi   DISP_NUM_H,    HIGH(@0)
    46: .ENDMACRO
    47: 
    48: ; **** СЕГМЕНТ ДАННЫХ ********************************************
    49: .DSEG
    50: .ORG SRAM_START
    51: 
    52: MCU_STATE:      .BYTE 1                     ; Текущее состояние МК
    53: SRAM_TEMP_1:    .BYTE 2                     ; Хранения временного 16-бит числа в ячейке
    54: DIGITS:         .BYTE 4                     ; Ячейки, где хранятся символы, для вывода на индикатор
    55: CURRENT_DIGIT:  .BYTE 1                     ; Номер разряда индикатора, который сейчас горит
    56: 
    57: ; **** СЕГМЕНТ КОДА **********************************************
    58: .CSEG
    59: 
    60: .ORG 0x00     
    61: 000000   C043  rjmp 	RESET_vect
    62: 
    63: .ORG 0x000D   
    64: 00000D   C000  rjmp  TIMER0_COMPA_vect
    65: 
    66: ; **** ДИНАМИЧЕСКАЯ ИНДИКАЦИЯ ************************************
    67: TIMER0_COMPA_vect:
    68: 00000E   934F  push      r20
    69: 00000F   9140  lds       r20,  CURRENT_DIGIT
        000010   0067
    70: 000011   3045  cpi       r20,  5
    71: 000012   F40C  brge      reset_digit_idx
    72: 000013   C003  rjmp      _indicate_1
    73: 
    74:   reset_digit_idx:
    75: 000014   2744  clr     r20
    76: 000015   9340  sts     CURRENT_DIGIT, r20
        000016   0067
    77: 
    78:   _indicate_1:
    79: 000017   3040  cpi       r20, 0
    80: 000018   F441  brne      _indicate_2
    81: 
    82: 000019   9893  cbi       PORTD, DIGIT_2_PIN
    83: 00001A   9894  cbi       PORTD, DIGIT_3_PIN
    84: 00001B   9895  cbi       PORTD, DIGIT_4_PIN
    85: 00001C   9A92  sbi       PORTD, DIGIT_1_PIN
    86: 00001D   9100  lds       TEMP_REG_A, DIGITS+3
        00001E   0066
    87: 00001F   D072  rcall     DISPLAY_DECODER
    88: 000020   D051  rcall     USI_TRANSMIT
    89: 
    90:   _indicate_2:
    91: 000021   3041  cpi       r20, 1
    92: 000022   F441  brne      _indicate_3
    93: 
    94: 000023   9892  cbi       PORTD, DIGIT_1_PIN
    95: 000024   9894  cbi       PORTD, DIGIT_3_PIN
    96: 000025   9895  cbi       PORTD, DIGIT_4_PIN
    97: 000026   9A93  sbi       PORTD, DIGIT_2_PIN
    98: 000027   9100  lds       TEMP_REG_A, DIGITS+2
        000028   0065
    99: 000029   D068  rcall     DISPLAY_DECODER
   100: 00002A   D047  rcall     USI_TRANSMIT
   101: 
   102:   _indicate_3:
   103: 00002B   3042  cpi       r20, 2
   104: 00002C   F441  brne      _indicate_4
   105: 
   106: 00002D   9892  cbi       PORTD, DIGIT_1_PIN
   107: 00002E   9893  cbi       PORTD, DIGIT_2_PIN
   108: 00002F   9895  cbi       PORTD, DIGIT_4_PIN
   109: 000030   9A94  sbi       PORTD, DIGIT_3_PIN
   110: 000031   9100  lds       TEMP_REG_A, DIGITS+1
        000032   0064
   111: 000033   D05E  rcall     DISPLAY_DECODER
   112: 000034   D03D  rcall     USI_TRANSMIT
   113: 
   114:   _indicate_4:
   115: 000035   3043  cpi       r20, 3
   116: 000036   F441  brne      _indicate_exit
   117: 
   118: 000037   9892  cbi       PORTD, DIGIT_1_PIN
   119: 000038   9893  cbi       PORTD, DIGIT_2_PIN
   120: 000039   9894  cbi       PORTD, DIGIT_3_PIN
   121: 00003A   9A95  sbi       PORTD, DIGIT_4_PIN
   122: 00003B   9100  lds       TEMP_REG_A, DIGITS
        00003C   0063
   123: 00003D   D054  rcall     DISPLAY_DECODER
   124: 00003E   D033  rcall     USI_TRANSMIT
   125: 
   126:   _indicate_exit:
   127: 00003F   9543  inc       r20
   128: 000040   9340  sts       CURRENT_DIGIT, r20
        000041   0067
   129: 000042   914F  pop r20
   130: 000043   9518  reti
   131: 
   132: ; **** СТАРТ ПРОГРАММЫ *******************************************
   133: RESET_vect:
   134: 000044   ED0F  ldi       TEMP_REG_A, LOW(RAMEND)
   135: 000045   BF0D  out       SPL, TEMP_REG_A
   136: 
   137: ; **** ПРОЦЕСС ИНИЦИАЛИЗАЦИИ МК **********************************
   138: MCU_INIT:
   139:   ; **** ИНИЦИАЛИЗАЦИЯ ПОРТОВ ************************************
   140:   outi      r16, DDRD, (1<<LED_POWER_PIN) | (1<<DIGIT_1_PIN) | (1<<DIGIT_2_PIN) | (1<<DIGIT_3_PIN) | (1<<DIGIT_4_PIN)
   140: 000046   E70C  ldi       R16, (1<<LED_POWER_PIN)|(1<<DIGIT_1_PIN)|(1<<DIGIT_2_PIN)|(1<<DIGIT_3_PIN)|(1<<DIGIT_4_PIN)
   140: 000047   BB01  out       DDRD, R16
   141:   outi      r16, DDRB, (1<<USI_CLK_PIN) | (1<<USI_DO_PIN) | (1<<USI_LATCH_PIN) | (1<<PB2)
   141: 000048   EC05  ldi       R16, (1<<USI_CLK_PIN)|(1<<USI_DO_PIN)|(1<<USI_LATCH_PIN)|(1<<PB2)
   141: 000049   BB07  out       DDRB, R16
   142:   
   143:   ; **** ИНИЦИАЛИЗАЦИЯ ТАЙМЕРОВ **********************************
   144:   outi      r16, TCCR0A, (1<<WGM01)             ; режим CTC Compare A
   144: 00004A   E002  ldi       R16, (1<<WGM01)
   144: 00004B   BF00  out       TCCR0A, R16
   145:   outi      r16, TCCR0B, (1<<CS02) | (1<<CS00)  ; 1024 делитель
   145: 00004C   E005  ldi       R16, (1<<CS02)|(1<<CS00)
   145: 00004D   BF03  out       TCCR0B, R16
   146:   outi      r16, OCR0A, 25                      ; число для сравнения. (60Hz)
   146: 00004E   E109  ldi       R16, 25
   146: 00004F   BF06  out       OCR0A, R16
   147:   outi      r16, TIMSK, (1<<OCIE0A)             ; включение прерывания по совпадению
   147: 000050   E001  ldi       R16, (1<<OCIE0A)
   147: 000051   BF09  out       TIMSK, R16
   148: 
   149: 000052   2411  clr       r1
   150: 000053   E6E6  ldi	      ZL,LOW(2*DISPLAY_SYMBOLS)
   151: 000054   E0F1  ldi	      ZH,HIGH(2*DISPLAY_SYMBOLS)
   152: 
   153: 000055   9210  sts   CURRENT_DIGIT, r1
        000056   0067
   154: 
   155: 000057   9478  sei
   156:   display_load 240                       ; загружаем число, которое нужно показать на индикатор
   156: 000058   EF60  ldi   DISP_NUM_L,    LOW(240)
   156: 000059   E070  ldi   DISP_NUM_H,    HIGH(240)
   157: 
   158: ; **** ГЛАВНЫЙ ЦИКЛ **********************************************
   159: LOOP:
   160: 00005A   D021  rcall       DISPLAY_UPD_DIGITS          ; получаем из этого числа цифры путем деления и распределяем их по ячейкам в SRAM
   161:   
   162: 00005B   D04E  rcall       TOGGLE_POWER_LED
   163: 00005C   D03C  rcall       DELAY
   164:   
   165: 00005D   9563  inc         DISP_NUM_L
   166: 
   167: 00005E   CFFB  rjmp      LOOP
   168: 
   169: ; **** ПОДПРОГРАММЫ **********************************************
   170: .INCLUDE "div16u.asm"
  Including file div16u.asm

     1: ;***************************************************************************
     2: ;*
     3: ;* "div16u" - 16/16 Bit Unsigned Division
     4: ;*
     5: ;* This subroutine divides the two 16-bit numbers 
     6: ;* "dd8uH:dd8uL" (dividend) and "dv16uH:dv16uL" (divisor). 
     7: ;* The result is placed in "dres16uH:dres16uL" and the remainder in
     8: ;* "drem16uH:drem16uL".
     9: ;*  
    10: ;* Number of words	:19
    11: ;* Number of cycles	:235/251 (Min/Max)
    12: ;* Low registers used	:2 (drem16uL,drem16uH)
    13: ;* High registers used  :5 (dres16uL/dd16uL,dres16uH/dd16uH,dv16uL,dv16uH,
    14: ;*			    dcnt16u)
    15: ;*
    16: ;***************************************************************************
    17: 
    18: ;***** Subroutine Register Variables
    19: 
    20: .def	drem16uL=r14
    21: .def	drem16uH=r15
    22: .def	dres16uL=r16
    23: .def	dres16uH=r17
    24: .def	dd16uL	=r16
    25: .def	dd16uH	=r17
    26: .def	dv16uL	=r18
    27: .def	dv16uH	=r19
    28: .def	dcnt16u	=r20
    29: 
    30: ;***** Code
    31: 
    32: div16u:	
    33: 00005F   24EE  clr			drem16uL								; clear remainder Low byte
    34: 000060   18FF  sub			drem16uH,drem16uH				; clear remainder High byte and carry
    35: 000061   E141  ldi			dcnt16u,17							; init loop counter
    36: d16u_1:	
    37: 000062   1F00  rol			dd16uL									; shift left dividend
    38: 000063   1F11  rol			dd16uH
    39: 000064   954A  dec			dcnt16u									; decrement counter
    40: 000065   F409  brne		d16u_2									; if done
    41: 000066   9508  ret															; return
    42: d16u_2:	
    43: 000067   1CEE  rol			drem16uL								; shift dividend into remainder
    44: 000068   1CFF  rol			drem16uH
    45: 000069   1AE2  sub			drem16uL,dv16uL					; remainder = remainder - divisor
    46: 00006A   0AF3  sbc			drem16uH,dv16uH
    47: 00006B   F420  brcc		d16u_3									; if result negative
    48: 00006C   0EE2  add			drem16uL,dv16uL					; restore remainder
    49: 00006D   1EF3  adc			drem16uH,dv16uH
    50: 00006E   9488  clc															; clear carry to be shifted into result
    51: 00006F   CFF2  rjmp		d16u_1									; else
    52: d16u_3:	
    53: 000070   9408  sec															; set carry to be shifted into result
    54: 000071   CFF0  rjmp		d16u_1
  Continuing file firmware.asm
   171: .INCLUDE "usi.asm"
  Including file usi.asm

     1: ; **** ОТПРАВКА БАЙТА В СДВИГОВЫЙ РЕГИСТР *************************
     2: USI_TRANSMIT:
     3: 000072   B80F  out       USIDR, r0            ; Move byte from temp register to USI Data Register
     4: 
     5:   ; Enable USI Overflow Interrupt Flag (will be 0 if transfer is not compeleted)
     6: 000073   E400  ldi       TEMP_REG_A, (1<<USIOIF)      
     7: 000074   B90E  out       USISR, TEMP_REG_A
     8:   
     9:   ; Load settings of USI into temp register
    10:   ; This will setup USI to Three-wire mode, Software clock strobe (USITC) 
    11:   ; with External, positive edge and toggle USCK
    12:   ;
    13:   ; USIWM0 <--------------> USI Wire Mode
    14:   ; USICS1 <--------------> USI Clock Source Select
    15:   ; USICLK <--------------> USI Clock Strobe
    16:   ; USITC  <--------------> USI Toggle Clock (Enable clock generation)      
    17: 000075   E10B  ldi       TEMP_REG_A, (1<<USIWM0) | (1<<USICS1) | (1<<USICLK) | (1<<USITC)
    18:   
    19:   _USI_TRANSMIT_LOOP:             ; Execute loop when USIOIF is 0
    20: 000076   B90D  out       USICR, TEMP_REG_A   ; Load settings from temp register into USI Control Register
    21: 000077   9B76  sbis      USISR, USIOIF       ; If transfer is comleted then move out of loop
    22: 000078   CFFD  rjmp      _USI_TRANSMIT_LOOP
    23: 
    24:   ; Send pulse into LATCH pin. 
    25:   ; This will copy byte from 74hc595 shift register into 74hc595 storage register
    26: 000079   9AC0  sbi      PORTB, USI_LATCH_PIN
    27: 00007A   98C0  cbi      PORTB, USI_LATCH_PIN
    28: 00007B   9508  ret
  Continuing file firmware.asm
   172: 
   173: ; **** ПОЛУЧЕНИЕ ЦИФР ИЗ 16-ТИ БИТНОГО ЧИСЛА *********************
   174: ; Описание: Перемещает цифры числа в соответствующие ячейки памяти в SRAM
   175: ;           путем деления этого числа несколько раз
   176: DISPLAY_UPD_DIGITS:
   177: 00007C   E084  ldi   r24,    4                     ; максимум 4 цифры, т.к индикатор четырех разрядный
   178: 00007D   E6A3  ldi   XL, LOW(DIGITS)
   179: 00007E   E0B0  ldi   XH, HIGH(DIGITS)
   180: 
   181:   .equ  dividend      = SRAM_TEMP_1
   182:   .equ  divisor       = 10
   183: 
   184:   ; загружаем делимое в адрес SRAM делимого
   185: 00007F   9360  sts   dividend,     r22
        000080   0061
   186: 000081   9370  sts   dividend+1,   r23
        000082   0062
   187: 
   188:   ; четыре раза производим деление для получения остатков
   189:   DIV_LOOP:
   190:     ; заполняем нужные регистры
   191: 000083   9100  lds   dd16uL, dividend
        000084   0061
   192: 000085   9110  lds   dd16uH, dividend+1
        000086   0062
   193: 000087   E02A  ldi   dv16uL, LOW(divisor)
   194: 000088   E030  ldi   dv16uH, HIGH(divisor)
   195:     
   196: 000089   DFD5  rcall div16u                      ; делим
   197: 
   198: 00008A   92ED  st   X+,    drem16uL              ; сохраняем остаток в ячейку по указателю
   199: 
   200:     ; обновляем делимое
   201: 00008B   9300  sts  dividend,   dres16uL
        00008C   0061
   202: 00008D   9310  sts  dividend+1, dres16uH
        00008E   0062
   203: 
   204: 00008F   958A  dec   r24                         ; декрементируем счетчик цикла
   205: 000090   F791  brne  DIV_LOOP                    ; делим еще раз если не 0
   206: 000091   9508  ret
   207: 
   208: ; **** ЗАГРУЖАЕТ НУЖНЫЙ АДРЕС СИМВОЛА В R0 ***********************
   209: DISPLAY_DECODER:
   210: 000092   E6E6  ldi	      ZL, LOW(2*DISPLAY_SYMBOLS)
   211: 000093   E0F1  ldi	      ZH, HIGH(2*DISPLAY_SYMBOLS)
   212: 
   213: 000094   2711  clr       TEMP_REG_B
   214: 000095   0FE0  add       ZL, TEMP_REG_A
   215: 000096   1FF1  adc       ZH, TEMP_REG_B
   216: 
   217: 000097   9004  lpm       r0, Z
   218: 000098   9508  ret
   219: 
   220: DELAY:                                
   221: 000099   930F  push      r16
   222: 00009A   931F  push      r17
   223: 
   224:   
   225: 
   226: 00009B   EF0F  ldi r16, 255
   227:   _l_1:
   228: 00009C   EF1F  ldi r17, 255
   229:   _dec_1:
   230: 00009D   951A  dec r17
   231: 00009E   0000  nop
   232: 00009F   0000  nop
   233: 0000A0   0000  nop
   234: 0000A1   0000  nop
   235: 0000A2   0000  nop
   236: 0000A3   0000  nop
   237: 0000A4   F7C1  brne _dec_1
   238: 0000A5   950A  dec r16
   239: 0000A6   F7A9  brne _l_1
   240:   
   241:   ; ldi       r16, 255
   242:   ; _DELAY_3:
   243:   ;   ldi       r17, 255
   244:   ; _DELAY_2:
   245:   ;   dec     r17
   246:   ;   brne    _DELAY_2
   247:   ; _DELAY_1:
   248:   ;   dec     r16
   249:   ;   brne    _DELAY_3
   250: 
   251: 0000A7   911F  pop       r17
   252: 0000A8   910F  pop       r16
   253: 0000A9   9508  ret                    
   254: 
   255: TOGGLE_POWER_LED:
   256: 0000AA   930F  push      r16
   257: 0000AB   931F  push      r17
   258: 0000AC   E400  ldi       r16,   (1<<LED_POWER_PIN)
   259: 0000AD   B312  in        r17,   PORTD
   260: 0000AE   2710  eor       r17,   r16
   261: 0000AF   BB12  out       PORTD, r17
   262: 0000B0   911F  pop       r17
   263: 0000B1   910F  pop       r16
   264: 0000B2   9508  ret
   265: 
   266: DISPLAY_SYMBOLS:
   267:       ; HGFEDCBA    HGFEDCBA
   268:   .DB 0b11000000, 0b11111001          ; 0, 1
        0000B3 F9C0
   269:   .DB 0b10100100, 0b10110000          ; 2, 3
        0000B4 B0A4
   270:   .DB 0b10011001, 0b10010010          ; 4, 5
        0000B5 9299
   271:   .DB 0b10000010, 0b11111000          ; 6, 7
        0000B6 F882
   272:   .DB 0b10000000, 0b10010000          ; 8, 9
        0000B7 9080
   273:   .DB 0b10011100                      ; °
 -> Warning 004: Number of bytes on line is odd, added 00 to fit program memory!
   File: /home/sergeyyarkov/Documents/Projects/Firmwares/AVR/attiny2313a_thermostat/firmware.asm, Line: 273
   Source line:   .DB 0b10011100                      ; °
        0000B8 009C
   274: 
   275: ; **** СЕГМЕНТ EEPROM ********************************************
   276: ; .ESEG
   277: ; INFO:       .DB "AVR Thermostat. Written by Sergey Yarkov 22.01.2023"

List of symbols:
Type nDef nUsed             Decimalval           Hexval Name
  T     1     1                     89               59 ATTINY2313A
  L     1     0                     96               60 MCU_STATE
  L     1     1                     97               61 SRAM_TEMP_1
  L     1     6                     99               63 DIGITS
  L     1     4                    103               67 CURRENT_DIGIT
  L     1     2                     14               0E TIMER0_COMPA_VECT
  L     1     2                     20               14 RESET_DIGIT_IDX
  L     1     2                     23               17 _INDICATE_1
  L     1     2                     33               21 _INDICATE_2
  L     1     2                     43               2B _INDICATE_3
  L     1     2                     53               35 _INDICATE_4
  L     1     2                     63               3F _INDICATE_EXIT
  L     1     2                     68               44 RESET_VECT
  L     1     0                     70               46 MCU_INIT
  L     1     2                     90               5A LOOP
  L     1     2                     95               5F DIV16U
  L     1     4                     98               62 D16U_1
  L     1     2                    103               67 D16U_2
  L     1     2                    112               70 D16U_3
  L     1     8                    114               72 USI_TRANSMIT
  L     1     2                    118               76 _USI_TRANSMIT_LOOP
  L     1     2                    124               7C DISPLAY_UPD_DIGITS
  L     1     2                    131               83 DIV_LOOP
  L     1     8                    146               92 DISPLAY_DECODER
  L     1     2                    153               99 DELAY
  L     1     2                    156               9C _L_1
  L     1     2                    157               9D _DEC_1
  L     1     2                    170               AA TOGGLE_POWER_LED
  L     1     4                    179               B3 DISPLAY_SYMBOLS
  R     1    11                     16               10 TEMP_REG_A
  R     1     2                     17               11 TEMP_REG_B
  R     1     2                     22               16 DISP_NUM_L
  R     1     1                     23               17 DISP_NUM_H
  R     1     5                     14               0E DREM16UL
  R     1     5                     15               0F DREM16UH
  R     1     1                     16               10 DRES16UL
  R     1     1                     17               11 DRES16UH
  R     1     2                     16               10 DD16UL
  R     1     2                     17               11 DD16UH
  R     1     3                     18               12 DV16UL
  R     1     3                     19               13 DV16UH
  R     1     2                     20               14 DCNT16U
  C     1     0                     23               17 NOW_Y
  C     1     0                      4               04 NOW_M
  C     1     0                     23               17 NOW_D
  C     1     0                  45039             AFEF NOW_I
  C     1     5                      2               02 DIGIT_1_PIN
  C     1     5                      3               03 DIGIT_2_PIN
  C     1     5                      4               04 DIGIT_3_PIN
  C     1     5                      5               05 DIGIT_4_PIN
  C     1     2                      6               06 LED_POWER_PIN
  C     1     3                      0               00 USI_LATCH_PIN
  C     1     1                      6               06 USI_DO_PIN
  C     1     1                      7               07 USI_CLK_PIN
  C     1     0                      1               01 MCU_STATE_DEFAULT
  C     1     0                      2               02 MCU_STATE_PROGRAM
  C     1     0                      3               03 MCU_STATE_ERROR
  C     1     6                     97               61 DIVIDEND
  C     1     2                     10               0A DIVISOR

List of macros:
nLines nUsed nParams Name
     2     6       3 OUTI
     2     1       1 DISPLAY_LOAD

Program             :      167 words.
Constants           :        6 words.
Total program memory:      173 words.
Eeprom space        :        0 bytes.
Data segment        :        8 bytes.
Compilation completed, no errors.
Compilation ended 23.04.2023, 20:09:24